Hands on training - project internship program in Embedded systems in chennai

[vedha.v]

Hands on training - project internship program in Embedded systems in chennai



Start:
December 10, 2012 10:00 am
End:
December 21, 2012 1:00 pm
Category:
Workshop
Organizer:
Simple Labs
Phone:
044 - 2225 1636
Email:
info@simplelabs.co.in
Location: Chennai


State: Tamil Nadu
Address:
Google Map
India
With so many students approaching Project Centers to get their final year projects done, by just paying money, we were disappointed.. What's the point of being a college graduate if one can't even come out with a project at the end of a 3/4/5-year college education..? Our inference was straight: Most of the students flunked, when it came to handling stuff practically and colleges cared less about it.

That's when we thought and came out with this Program: A 30 hour long Exciting training course in Embedded Systems using Arduino. This course has been tailor-made to give you complete hands-on exposure to embedded systems and building prototypes. The course focuses on extensive project based learning methodology with a special focus on interfacing different types of hardware – sensors, actuators, displays & other devices (GSM, ZIGBEE, IR Remotes, etc.)

Day wise schedule given below..

Duration: 10 Days / 30 Hrs [ 3hrs x 10 Sessions]

Fees: 6790/- per person[Inclusive of Kit cost + Training Fee + Taxes]

10% Discount on the total fees when you register as a group of 10 or more.
10% Discount on the training fee if you've attended any of our (non-free)workshops.
Venue: Simple Labs Office, Ekkatuthangal, Chennai

Certificate: Yes – All Participants get a Certificate..

Prerequisites:

Participants are required to bring in a laptop.. You'll be experimenting a lot..
Participants are required to have a very basic knowledge in C programming. (If you know how to use 'for', 'if', 'while' statements, it's more than enough)
and you don't have to be a student to attend.. We'll love to train anyone who's interested..
Proposed Schedule

Start Date   End Date   Timings
30th November 2012   9th December 2012   10.00 am – 1.00 pm – Daily
10th December 2012   21st December 2012   10.00 am – 1.00 pm- Weekdays
15th December 2012   13th January 2013   10.00 am – 1.00 pm- Weekends only
17th December 2012   28th December 2012   4.00 pm – 7.00 pm- Weekdays
24th December 2012   4th January 2013   10.00 am – 1.00 pm- Weekdays
5th January 2013   3rd February 2013   4.00 pm – 7.00 pm- Weekends only



Simple Labs reserves the right to reschedule/cancel any of the above events without any prior notification.
Registrations are strictly on a first-come, first-serve basis and a maximum of 20 per batch.


Kit Contents

InduinoX Board x 1 [Atmega328 Microcontroller + DS1307 RTC + TSOP IR Receiver + IR LED + LDR + RGB LED + 3 LEDS + 3 Switches]
LCD Shield x 1
16×2 LCD x 1
Stripper x 1
Aligner x 1
Breadboard x 1
Breadboard Components x 1 [TSOP, Voltage Regulator - 7805, Capacitors, Resistors, LEDs, Buttons, L293D, wires, etc]
USB Cable x 1
Hook-up Wire Set x 1
IR Remote x 1
IR Proximity Sensors x 1
Temperature Sensor(LM35) x 1
DTMF Decoder Board x 1
Relay Control Board x 1
Course Contents – Day by Day Overview

Day 1 – Introduction

Introduction to Embedded Systems – 30 Mins
Introduction to Arduino – 15 Mins
Kit Contents Overview – 15 Mins
Arduino IDE & Driver Installation – 30 Mins
InduinoX Board Overview – 15 Mins
Program Structure Overview – 15 Mins
Working with Digital Outputs – 30 Mins
Building a Simple Binary Counter – 30 Mins
Day 2 – Digital I/O's

Introduction to Digital Inputs – 15 Mins
Working with switches – 60 Mins
Building a Simple Switch Controlled Binary Counter – 15 Mins
Working with Serial Communication – 60 Mins
Controlling the Binary Counter through a Serial Interface – 30 Mins
Day 3 – Analog I/O's

Working with Analog Inputs – LDR [Light Sensor] – 20 Mins
Building A Simple LDR based Lighting Level Controller – 30 Mins
Working with Analog Outputs – RGB LEDs – 20 Mins
Generating Random Colors – 20 Mins
Controlling the intensity of an LED with switches – 20 Mins
Building a Simple Color Mixer with a Simple User Interface – 50 Mins
Working with Analog Inputs – LM35 [Temperature Sensor] – 20 Mins
Day 4 – Advanced I/O Operations & Displays

Advanced I/O Operations – PORT Manipulation – Driving a 7-Segment LED – 60 Mins
Displaying Temperature using two 7-Segment LEDs – 40 Mins
Working with Liquid Crystal Displays –60 Mins
Adding an LCD Interface to Random Color Generator – 30 Mins
Day 5 – I2C Communication & Timers

Working with I2C Communication – RTC – DS1307 – 60 Mins
Build a Simple LCD Clock – 60 Mins
Build a Simple Timer Controlled Lighting System – 30 Mins
Working with 'millis()' and 'micros()' – 30 Mins
Day 6 – IR Communication

Introduction to Communication Protocols – IR Remotes / SIRC – 15 Mins
Decoding the SIRC protocol – 40 Mins
Controlling LEDs with a TV remote – 15 Mins
Encoding the SIRC protocol – 60 mins
Building a IR Based Communication System – 60 Mins
Day 7 – Interrupts & Motor Control

Working with Interrupts – 30 Mins
Working with Motor Drivers – H-bridges – 60 Mins
Building a Remote Control Based Motor Speed Controller – 90 Mins
Day 8 – DTMF

Working with DTMF – 60 Mins
Working with Relays – 30 Mins
Building a Secure Device Control System using DTMF – 90 Mins
Day 9 – Advanced Serial Communication Devices

Interfacing GSM – Making a Call, Sending an SMS – 60 Mins
Interfacing RFID – Reading Tags and comparing – 60 Mins
Zigbee – Bidirectional Wireless Communication – 60 Mins
Day 10 – Raw Breadboard Construction

Breadboard Construction Overview – 15 Mins
Basic Power Regulation Circuitry – 45 Mins
Breadboard Construction of Micro-controller Circuitry – 30 Mins
Hardware Implementation of a Simple Project on Breadboard – 30 Mins
Queries and Certificate Distribution – 45 Mins
Click to register
click