SUTHERLAND PLACEMENT PAPER (TECHNICAL SCREENING ASSESSMENT)

Started by vedha.v, Dec 29, 2012, 07:37 PM

previous topic - next topic
Go Down

vedha.v

SUTHERLAND PLACEMENT PAPER (TECHNICAL SCREENING ASSESSMENT)
 

1) How many devices can work on a single IDE channel?
 
a.1
 
b.2
 
c.3
 
d.4
 
2) ISDN uses --- technology
 
a. only digital
 
b. digital and analog
 
c. only analog
 
d. neither digital nor analog
 
3) If a computer's BIOS allow, you can boot from a CD-ROM
 
a. true
 
b. false
 
4) CD-ROMs typically hold --- of data
 
a.500MB
 
b.650MB
 
c.1000MB
 
d.350MB
 
5) Firmware refers to what component?
 
a. hard drives
 
b. floppy drives
 
c. BIOS
 
d. RAM
 
6) Your CD-ROM audio cable connects to the:
 
a. speaker
 
b. sound card
 
c. hard drive
 
d. BIOS
 
7) Conventional memory is the first ---k?
 
a. 1024
 
b. 1048
 
c. 640
 
d. 512
 
8) What is the easiest way to make a bootable floppy disk?
 
a. buy one
 
b. using the sys c:a:/bootup command
 
c. start/settings/control panel/system/make start up disk
 
9) scan disk checks and fixes ---
 
a. tape drives
 
b. hard drives
 
c. CD ROM drives
 
d. DVD ROM drives
 
10) A user complains that when opening email attachments, the attachments disappear or cause an application error. What could cause this problem?
 
a. a possible virus
 
b. an incorrect setting in config.sys
 
c. autoexec.bat loading improperly
 
d. an incorrectly installed e-mail program
 
11) What is the purpose of a driver?
 
a. tells the OS how to interact with the device
 
b. improves the performance of installed devices by optimizing access patterns
 
c. provides more useful memory by moving device control data to extended memory
 
d. modifies application programs to work correctly with devices attached to a system
 
12) your modern will not detect a dial tone. What is the most two likely cause?
 
a. phone line may be defective
 
b. modem is set for tone dial
 
c. the ISP is down
 
d. the modem is set to disable call waiting
 
13) which of the following is the newest type of connector for a printer interface?
 
a. USB
 
b. Serial
 
c. SCSI
 
d. Parallel
 
14) On a system with one hard drive and one CD-ROM what is the typical placement of the CD-ROM drive?
 
a. Slave drive on the primary IDE channel
 
b. Master drive on the primary IDE channel
 
c. Slave drive on the secondary IDE channel
 
d. Master drive on the secondary IDE channel
 
15)which device connects to a parallel port?
 
a. Mouse
 
b. Joystick
 
c. Keyboard
 
d. Printer

Go Up
 

Quick Reply

With Quick-Reply you can write a post when viewing a topic without loading a new page. You can still use bulletin board code and smileys as you would in a normal post.

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Note: this post will not display until it's been approved by a moderator.
Name:
Email:
Verification:
Please leave this box empty:

Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:

shortcuts: alt+s submit/post or alt+p preview
IT Acumens Web Designing Chennai | GinGly :: Build your Personal Website | CineBuzz :: Cinema News | My Kids Diary :: Kids Memories Writing :: Book Website @ 349 Rs monthly
Copyright 2005 - 2020 :: IT Acumens :: All Rights Reserved. :: Sitemap
ITAcumens Discussion Forum with 2 lakhs post running for 15 years - Powered by IT Acumens Dedicated Server